Add AC In Fountain Valley, CA

When we got the call for this add AC in Fountain Valley CA we couldn’t resist. We had been contracted to do a similar job for another unit in their home, and were ecstatic to go back and double their cooling capacity!
Here’s a brief overview of the work performed:

• Install new 3 Ton, 13 SEER, 1-Stage, Amana Condenser (ASX130361) in approved location in attic
• Install new 3 Ton Evaporator Coil to furnace
• Install new Honeywell PRO Digital Programmable Thermostat (TH611) in existing location
• Install new 240v dedicated hi-voltage electrical circuit from existing electrical panel to condenser location
• Install new 3/4″-3/8″ Copper Refrigerant Lines between condenser and evaporator coil
• Install new lo-voltage control wiring between furnace and new A/C Condenser
• Install new 2-piece paintable lineset cover/s to conceal refrigerant lines on exterior of home
• Install Plastic Pad under new condenser to ensure proper drainage
• Install Earthquake Brackets securing new condenser to plastic pad
• Install Fusible Power Disconnect and Electrical Whip at new condenser
• Install new Condensation Removal Pump and 3/8″ Copper Primary Condensation Drain Line to terminate where downstairs drain line terminates
• Seal and Insulate all exposed sheet metal and connection points
• Pressurize refrigerant lines with nitrogen to test for leaks and remove moisture
• Pull vacuum on refrigerant lines and evaporator coil to remove all non-condensibles
• Charge system with R-410a Refrigerant using Superheat and Subcool calculations
• Test equipment to ensure proper operation